Non-ticking quartz movement with sliding seconds

• One of the most popular PRC-made budget non-ticking movements (Sangtai 6168S) with sliding seconds;
  
• Battery AA expected life ~ 5-8 months;
• Operating voltage - 1.3-1.7V;
• Accuracy +/- 30 seconds per month (at room temperature, battery voltage 1.5 V);
  
• Mechanism power ≥ 200 µ Nm (length of minute hands up to 150 mm);
• Clock mechanism dimensions 56 x 56 x 16 mm, (with hanger 69 mm);
• The diameter of the threaded part of the axis is 7.8mm, the diameter of the hole in the dial is 8-10mm;
• Suitable for S type (Japanese) indicators - hour axis Ø 5.57mm, minute axis Ø 3.63mm, seconds axis Ø 0.94mm, 
• The set includes a nut, a washer and a rubber washer;
• The clock mechanism has a 2-year warranty against manufacturer defects, the warranty does not cover improper use or assembly;
• For prices starting from 50 pieces, please ask by e-mail or using our contact form.

Attention:

Never turn the hands of the clock by hand! This may damage the mechanism and is not a warranty case. There is a button on the back of the movement case for setting the hands/time.

Do not use force when mounting indicators and mechanism - the mechanism is made mostly of plastic parts. 

Over-tightening the nut to secure the mechanism to the dial may cause part of the thread to break out of the case. A couple of strips of double-sided tape can help with fixation. 

Press the seconds hand onto the shaft just enough so that it does not fall off by gently pulling it.

After assembling the hands, when turning the installation knob, make sure that the hands do not touch each other or touch the dial in any position.

When making watches, take into account the possible deformations of materials (especially when the wood dries or when the humidity in the rooms changes). If there is too little "space" for the mechanism, the material can deform the mechanism or even break it.