Ticking quartz mehanism.

• One of the popular PRC-made ticking mehanisms (Sangtai 6168);
• Battery AA estimated lifetime ~12 months;
• Operating voltage - 1.3-1.7V; Accuracy - +/- 30 sec. per month at 1.5V DC and +25ºC;
• Power - ≥ 200 µ Nm, maximum lengths - minute 150mm;
• Clock mechanism dimensions 56 x 56 x 16 mm;
• The diameter of the threaded part of the axis is 7.8mm, the diameter of the hole in the dial is 8-10mm;
• Suitable for S type (Japanese) clock hands - hour axis Ø 5.57mm, minute axis Ø 3.63mm, seconds axis Ø 0.94mm,
• The set includes a nut, a washer and a rubber washer;
• The clock mechanism has a 2-year warranty against manufacturer defects, the warranty does not cover improper use or assembly;
• For prices starting from 50 pieces, please ask by e-mail or using our contact form.

Attention: Never turn the hands of the clock by hand! This may damage the mechanism and is not a warranty case. There is a button on the back of the movement case for setting the hands/time.

Do not use force when assembling the hands and the mechanism - the mechanism is mostly made of plastic parts. Over-tightening the nut to secure the movement to the dial may cause part of the thread to break out of the case. A couple of strips of double-sided tape can help with fixation.

Press the seconds hand onto the shaft just enough so that it does not fall off by gently pulling it.

After assembling the hands, when turning the installation knob, make sure that the hands do not touch each other or touch the dial in any position.